MODEL- SC-UNS012               VENDOR- SIIG, INC                            
                                                                            
FEATURES- USB 2.0+FireWire+SATA Combo
       USB 2.0 (3 ext. & 1 int.) + 1394 (2 ext. & 1 int.) + SATA (2 int.) 
        combo board.
       Compliant with Serial ATA Specification, revision 1.0.               
       Allows you to connect existing Ultra ATA 133/100/66 hard disk 
        drives to the latest Serial ATA host adapter.
       Combo card design adds Hi-speed USB 2.0, FireWire (1394a) and SATA 
        interfaces into your computer at once!
       Supports various types of USB 2.0/1.1, FireWire (1394a) and SATA 
        devices including digital cameras, CD- ROMs/DVD-ROMS, printers, 
        scanners, memory card reader/writers, PDAs, hubs, DV-camcorders, 
        SATA hard disk drives and more.
       Works with Sony, Panasonic, Cannon, Sharp, JVC and many other 
        brands of DV camcorders.
  Includes USB 2.0+FireWire+SATA Combo card, One Serial ATA cable,  One 
    Serial ATA 15-pin power cable, Driver software, User's manual.
 * USB 2.0 interface:
    - Compliant with USB specification rev. 2.0
    - Four USB 2.0 ports support hi-speed (480Mbps), full-speed (12Mbps) 
      and low-speed (1.5Mbps) data transfer modes for simultaneous 
      operation of multiple USB 2.0/1.1 devices.
    - Works with USB 2.0/1.1 devices including hubs, PC video cameras, 
      printers, CD-RW/DVD-ROMs, memory card reader/writers, USB flash 
      drives, digital cameras and more.
 * FireWire (1394a) interface:
    - Compliant with IEEE 1394-1995, P1394a-2000 and OHCI 1.1 standards.
    - Three FireWire (1394) ports support multiple device connections of 
      up to 63 devices.
    - Supports serial bus data transfer rates of 100, 200 and 400Mbps.
    - Works with FireWire (1394a) devices including hard drives, scanners, 
      CD-RW/DVD-ROM drives, DV camcorders, removable drives and other 
      audio/video devices such as set-top box.
 * Serial ATA interface:
    - Compliant with Serial ATA Specification, revision 1.0.
    - Provides two independent channels to connect up to two Serial ATA 
      hard disk drives.
    - Supports Serial ATA data transfer rates up to 150 MB/s (1.5Gb/s).
    - Features independent 256-byte FIFOs per channel for host reads and 
      writes.
    - Supports 32-bit wide PCI bus at 66MHz.
                                                                            
INTERFACE  - 32-bit PCI v2.2                                                
CONNECTORs - (3) USB 2.0 ports (external)
             (1) USB 2.0 port  (internal)
             (2) FireWire (1394a) ports (external)
             (1) FireWire (1392a) port  (internal)
             (2) Serial ATA ports (internal)
COMPATIBLE - Ultra ATA 100/66/33 and EIDE/Fast ATA-2 drives.                
             Co-exists with on-board IDE ports and connects up to 4 IDE 
              hard drives.                                                       
APPROVALS  - FCC Class B (DoC) & CE                                         
REQUIRES- Pentium or faster with available PCI slot, Windows 98/98SE/ME/    
           NT 4.0/2000/XP.                                                  
   Recommended system for Digital Video creating/editing: 
           - Pentium II 400 MHz computer
           - 64MB RAM and CD-ROM drive
           - 1 GB of available hard disk space
           - Video card with 4MB RAM
           - Windows 98SE or later
             www.siig.com  
                                                      support@siig.com