MODEL- SC-PE4B12-S4       VENDOR- SIIG
    
FEATURES- UltraATA 133 PCI 
       High-speed dual channel Ultra ATA/133 Bus Master host controller
        for PC.
       Works with various brands of Ultra ATA 133/100/66/33 hard disk
        drives and ATAPI devices including CD/ROM and CD-R/RW drives, 
        DVD-ROM and zip drives,
       Auto-detects drive types and fine tunes to the best performance for 
        each Ultra ATA drives.
    Includes UltraATA 133 PCI, Installation diskette, 40-pin/80-wire Ultra 
      ATA cable, User's manual.
* Compatibility:
   - Compliant with specification, revision 2.2 
   - Compliant with ATA/ATAPI-6 Specifications 
   - Compliant with UDMA6 ATA/133 Specifications 
   - Supports PCI 33 MHz with 32-bit data 
   - Full backward support for Ultra ATA/100/66/33 standards 
   - On-board flash BIOS for future upgrade 
* Data Transfer Modes supported:
   - Supports Ultra DMA (0-6) and Multi-word DMA mode (0-2), and PIO mode 
     (0-4).
   - Achieves burst data transfer rates up to 133MB/sec 
   - CRC error-checking provides data verification and achieves flawless 
     data transfer.
* Device Support:
   - Breaks the 137GB barrier! Supports various types of large capacity 
     hard disk drives.
   - Supports various brands of Ultra ATA 133/100/66/33 hard disk drives.
   - Coexists with on-board IDE controller and allows you connect up to 4 
     IDE devices.
   - Supports ATAPI devices including CD-ROM and CD-R/RW drives, and zip 
     drives.
* Advanced Features:
   - Auto-detects drive types and fine tunes to the best performance for 
     each Ultra ATA hard disk drives.
   - Support scatter/gather, multi-threaded, multi-tasking and automatic 
     FIFO threshold selection.
   - Provides two independent Ultra ATA channels (built-in 256-bytes FIFOS 
     per channel) for faster data transfer.
   - Full support ACPI (Advanced Configuration and Power Interface) for 
     advanced system power management.
     
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS- 32-bit PCI v2.2
CONNECTORs   - (2) IDE 40-pin ports
O/S SUPPORT  - Windows 98SE/ME/NT4.0/2000/XP 
REQUIREMENTS - Pentium or equivalent computers 
               available PCI slot 
               Windows 98SE or later 
APPROVALS    - FCC Class B (DoC) & CE 
             www.siig.com  
                                                      support@siig.com